d 110 mm Bore diameter
D 240 mm Outside diameter
T 54.5 mm Total width
B 50 mm Width of inner ring
C 42 mm Width of outer ring
Cup r (min.) 3 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 4 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 595000 N Basic dynamic load rating
C0r 595000 N Basic static load rating
Speeds
Grease 1500 min-1 Grease lubrication
Oil (Oil-bath) 2000 min-1 Oil-bath lubrication
Dimensions
a 45.1 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 131 mm Diameter of shaft abutment
Db (min.) 220 mm Diameter of housing abutment
Da (min.) 208 mm Diameter of housing abutment
Da (max.) 226 mm Diameter of housing abutment
Sa 6 mm Minimum width of space required in housing on large side face
Sb 12.5 mm Minimum width of space required in housing on small side face
db (max.) 143 mm Diameter of shaft abutment
ra (max.) 3 mm Radius of shaft or housing fillet of inner ring
ra (max.) 2.5 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.35 Constant
Y0 0.96 Axial load Factors
Y1 1.7 Axial load Factors
Mass
(approx.) 11 kg
We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK
HR30322J bearings
PREVIOUS:ZWZ HR32222J NEXT:ZWZ HR32024XJ
