d 110 mm Bore diameter
D 200 mm Outside diameter
T 56 mm Total width
B 53 mm Width of inner ring
C 46 mm Width of outer ring
Cup r (min.) 2.5 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 3 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 490000 N Basic dynamic load rating
C0r 565000 N Basic static load rating
Speeds
Grease 1800 min-1 Grease lubrication
Oil (Oil-bath) 2400 min-1 Oil-bath lubrication
Dimensions
a 47.2 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 128 mm Diameter of shaft abutment
Db (min.) 190 mm Diameter of housing abutment
Da (min.) 171 mm Diameter of housing abutment
Da (max.) 188 mm Diameter of housing abutment
Sa 5 mm Minimum width of space required in housing on large side face
Sb 10 mm Minimum width of space required in housing on small side face
db (max.) 127 mm Diameter of shaft abutment
ra (max.) 2.5 mm Radius of shaft or housing fillet of inner ring
ra (max.) 2 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.42 Constant
Y0 0.79 Axial load Factors
Y1 1.4 Axial load Factors
Mass
(approx.) 7.35 kg
We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK
HR32222J bearings
PREVIOUS:ZWZ HR33021J NEXT:ZWZ HR30322J
