ZWZ 32960

Boundary Dimensions
d 300 mm Bore diameter
D 420 mm Outside diameter
T 76 mm Total width
B 72 mm Width of inner ring
C 62 mm Width of outer ring
Cup r (min.) 3 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 4 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 1100000 N Basic dynamic load rating
C0r 1820000 N Basic static load rating
Speeds 
Grease 710 min-1 Grease lubrication
Oil (Oil-bath) 950 min-1 Oil-bath lubrication
Dimensions
a 79.3 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 321 mm Diameter of shaft abutment
Db (min.) 405 mm Diameter of housing abutment
Da (min.) 386 mm Diameter of housing abutment
Da (max.) 406 mm Diameter of housing abutment
Sa 13 mm Minimum width of space required in housing on large side face
Sb 14 mm Minimum width of space required in housing on small side face
db (max.) 326 mm Diameter of shaft abutment
ra (max.) 3 mm Radius of shaft or housing fillet of inner ring
ra (max.) 2.5 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.37 Constant
Y0 0.88 Axial load Factors
Y1 1.6 Axial load Factors
Mass

(approx.) 30.5 kg

32960 bearing

We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK
Best China Bearings Manufacturers and Bearing Distributors.

PREVIOUS:ZWZ HR32056XJ        NEXT:ZWZ HR32964J