Dimension series
ISO 4GD ISO355 dimension series approx.
Boundary Dimensions
d 190 mm Bore diameter
D 340 mm Outside diameter
T 97 mm Total width
B 92 mm Width of inner ring
C 75 mm Width of outer ring
Cup r (min.) 4 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 5 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 1370000 N Basic dynamic load rating
C0r 1770000 N Basic static load rating
Speeds
Grease 1000 min-1 Grease lubrication
Oil (Oil-bath) 1400 min-1 Oil-bath lubrication
Dimensions
a 80.5 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 217 mm Diameter of shaft abutment
Db (min.) 323 mm Diameter of housing abutment
Da (min.) 290 mm Diameter of housing abutment
Da (max.) 322 mm Diameter of housing abutment
Sa 10 mm Minimum width of space required in housing on large side face
Sb 22 mm Minimum width of space required in housing on small side face
db (max.) 216 mm Diameter of shaft abutment
ra (max.) 4 mm Radius of shaft or housing fillet of inner ring
ra (max.) 3 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.44 Constant
Y0 0.76 Axial load Factors
Y1 1.4 Axial load Factors
Mass
(approx.) 35.2 kg
HR32238J bearings
We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK
PREVIOUS:HR30236J NEXT:ZWZ 30338
