d 85 mm Bore diameter
D 180 mm Outside diameter
T 63.5 mm Total width
B 60 mm Width of inner ring
C 49 mm Width of outer ring
Cup r (min.) 3 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 4 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 505000 N Basic dynamic load rating
C0r 535000 N Basic static load rating
Speeds
Grease 2000 min-1 Grease lubrication
Oil (Oil-bath) 2800 min-1 Oil-bath lubrication
Dimensions
a 43.5 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 110 mm Diameter of shaft abutment
Db (min.) 167 mm Diameter of housing abutment
Da (min.) 151 mm Diameter of housing abutment
Da (max.) 166 mm Diameter of housing abutment
Sa 5 mm Minimum width of space required in housing on large side face
Sb 14.5 mm Minimum width of space required in housing on small side face
db (max.) 104 mm Diameter of shaft abutment
ra (max.) 3 mm Radius of shaft or housing fillet of inner ring
ra (max.) 2.5 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.35 Constant
Y0 0.96 Axial load Factors
Y1 1.7 Axial load Factors
Mass
(approx.) 7.31 kg
We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK
HR32317J bearing
PREVIOUS:ZWZ HR30317DJ NEXT:ZWZ 32318
