Needle roller bearing


Needle roller bearing


A needle roller bearingA needle roller bearing is a bearing which uses small cylindrical rollers. They are used to reduce friction of a rotating surface.

Needle bearings have a large surface area that is in contact with the bearing outer surfaces compared to ball bearings. Additionally there is less added clearance (difference between the diameter of the shaft and the diameter of the bearing) so they are much more compact. The typical structure consists of an a needle cage which orients and contains the needle rollers, the needle rollers themselves, and an outer race(sometimes housing itself).

Radial needle bearings are cylindrical and use rollers parallel to the axis of the shaft. Thrust needle bearings are flat and use a radial pattern of needles.

Full complement bearings have solid inner and outer rings and rib-guided cylindrical rollers. Since these bearings have the largest possible number of rolling elements, they have extremely high radial load carrying capacity and are suitable for particularly compact designs. [1]

Needle bearings are heavily used in engine components such as rocker arm pivots, pumps, compressors, and transmissions. The drive shaftof a rear-wheel drive vehicle typically has at least 8 needle bearings (4 in each U joint) and often more if it is particularly long, or operates on steep slopes.

Additional clarification of Needle Roller: According to "Marks' Standard Handbook for Mechanical Engineers", a Needle Bearing is a roller bearing with rollers whose length are at least four times their diameter.


<>Needle roller bearing
<>Needle roller bearing

bearing warehouse


 


PREVIOUS:Rolling-element bearing        NEXT:control center

ADD:Room 1701,17/F,HENAN BUILDING,NO.90 JAFFE ROAD,WANCHAI HONGKONG
TANCHIN INTERNATIONAL INDUSTRIES Co.,Ltd


ADD:152 BEACH ROAD,#14-03,GATEWAY EAST, SINGAPORE 189721
TANCHIN INDUSTRIES PTE. Ltd

  • Exchange links